HoduSoft PBX System
HoduSoft PBX system streamlines business voice communication, while their Contact Center solutions empower exceptional customer service and engagement.
This documentation provides step-by-step instructions on configuring HoduSoft, a multi-tenant Cloud PBX System, with the DIDForSale SIP Trunking solution. By following this guide, you will learn how to seamlessly integrate and set up the SIP trunking solution within the Hodusoft PBX system.
Creating a Free SIP Account at DIDForSale
To create a SIP account at DIDForSale, follow these steps:
Visit the DIDForSale website (www.didforsale.com) and sign up for a free account.
Once you have created your account, log in to the account portal at DIDForSale.
Navigate to the "Interconnection" section and select "SIP Accounts."
Click on "Add New SIP Account" to begin creating a new SIP account.
Fill in the required details to create the SIP account.
After completing the form, you will receive an email containing an activation link.
Click on the activation link in the email to activate your SIP account.
Setting up your Hodusoft PBX System with DIDForSale
To configure your Hodusoft PBX System with DIDForSale, follow these steps:
Step 1: Logging in to Hodusoft PBX Admin Pane
Launch your web browser and enter the URL for your Hodusoft PBX admin panel.
Enter your login credentials to access the admin panel.
Step 2 - Adding a Vendor
In the admin panel, navigate to the "Commerce" section and select "Vendor."
Click on "Add New" to add a new vendor.
Fill in the necessary details for the vendor.
Step 3 - Adding ACL List IPs
In the admin panel, go to the "Commerce" section and select "ACL List."
Click on "Add New" to add the IPs of DIDForSale for accepting incoming calls on the DID.
Fill in the details of the IP and click "Create." You can repeat this step for multiple IPs.
Step 4 - Add a DID Type
In the admin panel, go to the "Commerce" section and select "DIDType."
Click on "Add New" to add a new DID type.
Fill in the details for the DID type, including name, description, currency, and sell rate plan.
Step 5 - Adding a DID number purchased from DIDForSale.
In the admin panel, go to the "Commerce" section and select "DID Number."
Click on "Add New" to add a new DID number.
Fill in the following details for the DID:
Number: The purchased DID number.
DID name: The same as the DID number.
Select Vendor: Choose "DIDForSale."
Tenant: Select the tenant to whom this DID is assigned.
DID Type: Choose "DID General."
Description: Provide a description.
Buy Rate Plan: Select the buy rate plan from the vendor.
Sell Rate Plan: Set the sell rate plan to the tenant.
Once the DID/s are added you can see a list of them as per below.
Step 6. Adding Gateways (SIP Trunking Information)
In the admin panel, go to the "Commerce" section and select "Gateway."
Click on "Add New" to add a new gateway.
Fill in the following details for the gateway:
Vendor: Select "DIDForSale."
IP/Domain: Enter SIP Domain (received via email after SIP account creation).
Register: Set to "Yes."
Port: Set to "5060."
Transport: Set to "UDP."
DTMF: Set to "RFC2833."
Username: Enter SIP Username (received via email after SIP account creation).
Auth Username: Enter your SIP Username.
Password: Enter your SIP Password (received via email after SIP account creation).
Caller ID: Choose any one of your DID numbers.
Codec: Select "PCMA & PCMU."
Caller ID Header Type: Set to "Remote-Party-ID
Below is a sample after you fill in information.
Step 7. Setting Outgoing Rule
In the admin panel, go to the "Routing" section and select "Outgoing Rule."
Click on "Add New" to create a new outgoing rule.
Fill in the necessary details for the outgoing rule, specifically for the selected trunk provider (e.g., didforsale_trunk).
By following these steps, you should be able to configure your HoduSoft PBX System with a DIDForSale SIP account successfully. If you encounter any issues or require further assistance, please contact the support team for DIDForSale(contact-support@didforsale.com) or HoduSoft.
Last updated
